Emerson 3-Way Tele Prewired Kit

Handwired in the USA

Our 3-Way tele kits are our most popular prewired kit.. and for good reason; They improve your tone! We take great pride in using premium components that work and sound better than stock electronics found in your guitar. Our pots are hand metered and matched for great consistency and even taper on both the volume and tone knob (better control when rolling down the volume knob... no more mud) Our Emerson Paper in Oil capacitors sound amazing! Paper in Oil capacitors were used in vintage Fender and Gibsons for good reason... They sound amazing. Our kits are painstaking wired by hand one at a time in Broken Arrow Oklahoma, USA. We take great pride in our solder work and neatness when we craft our prewired kits. We build our kits to last a very long time and perform great. We think you will appreciate the detail both sonically and visually that goes into each and every one of our prewired kits.

This is a 3-Way Tele prewired assembly for Telecaster style guitars featuring 2 single coil pickups. It will drop into most Mexican or American Fender Teles with no modification. Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your control plate holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.

Includes:

- (2) CTS 250k Solid Shaft w/.250" Shaft Potentiometers (CONTROL PLATE MOUNT ONLY. PLEASE EMAIL US IF YOU NEED A LONGER SHAFT)

- (1) Oak Grigsby 3-Way Switch

- (1) Switchcraft 1/4" Mono Input Jack

- (1) 0.047uf Emerson Paper in Oil Capacitor

- (1) Volume Mod

Emerson 5-Way Strat Prewired Kit

Handwired in the USA

This is a prewired assembly for Stratocaster-style guitars. It will drop into most Mexican or American Fender Strats with no modification. Wired with 22 AWG vintage push-back wire for that vintage look and sound. If you are installing this on an import guitar with metric sized pots you may need to ream the pickguard holes to accept the slightly larger US-Spec pots. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life.

Includes:

- (3) CTS 250k Split Shaft w/.250" Shaft Potentiometers (PICKGUARD MOUNT ONLY. PLEASE EMAIL US IF YOU NEED A LONGER SHAFT)

- (1) Oak Grigsby 5-Way Switch

- (1) Switchcraft 1/4" Mono Input Jack (PREWIRED)

- (1) 0.047uf Emerson Paper in Oil Capacitor

- (1) Volume Mod

- Wiring Diagram

Emerson 72 Tele Deluxe Prewired Kit

Handwired in the USA

This is a prewired harness for Tele Deluxe Models (4-knobs). Carefully wired “50’s Style” and grounded with vintage correct 20 AWG bus wire for that vintage tone. For import guitars you may need to enlarge the holes for the higher quality US spec electronics to fit and also you may need US Spec knobs.

Includes:

• (4) 500K CTS Short Split Shaft Potentiometers

• (1) Switchcraft J11 1/4" mono input jack (MADE IN USA)

• (1) .022uf Emerson & (1) 0.015uf Emerson Paper in OilCapacitors

• (2) Volume Mods

• (1) Wiring Diagram

Emerson EM-Drive

Handwired, Handbuilt in Broken Arrow, Oklahoma USA using some of the finest quality & reliable parts available. This pedal does everything from a slight boost/sparkle to a nice, warm light OD sound. Good for use as a first stage OD or a nice boost pedal.... you may find yourself leaving this on the entire gig!

Specs: -NOS PIO (New Old Stock Paper In Oil) capacitors -Handwired Construction -Quality High Tolerance CTS Pots (Hand Metered & Matched) -Durable Turquoise powdercoated finish -Davies knobs -USA Switchcraft jacks -3PDT True Bypass Footswitch -Hand picked and matched parts for tone and durability -Power: Standard 9-18V volt DC power supply with a negative center 2.1mm barrel, NO internal battery option.

We highly recommend a quality power supply that utilizes isolated power. This would include the Voodoo Lab PP2+ or the IS0-5 and several other brands/models.

Includes full warranty against defects in components or manufacturing. We do not have a return policy for non-defective pedals, so if that is important to you please purchase a standard unit through one of our authorized dealers. Thank you for your interest in Emerson Custom Guitars!

Emerson Jazz Bass Prewired Kit

-Handwired in the USA

Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your pickguard holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.

Includes:

- (3) CTS 250k Solid Shaft w/.250" Shaft Potentiometers

- (1) Switchcraft 1/4" Mono Input Jack

- (1) 0.047uf Emerson Custom Paper in Oil Capacitor

- (1) Volume Mod

- Wiring Diagram

Emerson Les Paul Jr. Prewired Kit

Handwired in the USA

This is a prewired assembly for Gibson Les Paul Junior guitars. Wired with 22 AWG external braid vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life.

Includes:

- (2) CTS 500k Split Shaft w/.375" Shaft Potentiometers

- (1) Switchcraft 1/4" Mono Input Jack (PREWIRED)

- (1) 0.022uf Emerson Paper in Oil Capacitor

- (1) Volume Mod

- Wiring Diagram

Emerson P-Bass Prewired Kit

Handwired in the USA

Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your pickguard holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.

Includes:

- (2) CTS 250k Solid Shaft w/.250" Shaft Potentiometers (PICKGUARD MOUNT ONLY. PLEASE EMAIL US IF YOU NEED A LONGER SHAFT)

- (1) Switchcraft 1/4" Mono Input Jack

- (1) 0.047uf Emerson Paper in Oil Capacitor

- (1) Volume Mod

- Wiring Diagram

Emerson Paramount

Handwired, Handbuilt in Broken Arrow, Oklahoma USA using some of the finest quality materials available.

The Paramount Overdrive is a Medium Gain (Second Stage Overdrive) that stacks very well with almost any pedal. It can be ran at 9-18v (18v for more headroom). The Paramount is an original Emerson circuit that is powerful has plenty of usable gain on tap to fit most any situation. The Paramount's character is refreshingly unique yet sits in the mix very well and has a familiar sound. This pedal is very dynamic and responds well to pick attack and the subtle nuances of the player.

Specs:

-USA Made Custom Potentiometers (for an excellent taper and feel)

-Handwired Construction

-Blue LED

-Durable Matte Black Powdercoated Finish

-USA Switchcraft Jacks -3PDT True Bypass Footswitch

-Hand picked and matched parts for ultimate tone.

-Each & Every Pedal is Handbuilt, wired and tested in Broken Arrow, Oklahoma USA

-Power: Standard 9-18V volt DC power supply with a negative center 2.1mm barrel, NO internal battery option.

We highly recommend a quality power supply that utilizes isolated power. This would include the Voodoo Lab PP2+ or the IS0-5 and several other brands/models.

Includes full warranty against defects in components or manufacturing. Please see our Warranty Page.

Emerson Prewired 3-Way Toggle Switch (Switchcraft) Short Straight Nickel

Prewired 3-Way Switchcraft Short Straight Toggle Switch

Here is our newly redesigned Prewired 3-Way Toggle Switch. Color coded 22 gauge pre-tinned wire makes soldering a breeze... No more cussing over getting that vintage outer braid to heat up so you can solder your grounds. Fully HeatShrunk, Wired Up like a champ and ready to throw in your Les Paul, or any other style of guitar that requires a Gibson style 3-way toggle switch. We've done all the hard work for you so that you can have a flawless and reliable sound in an easy to install package. Also the wire that we use on these kits in the same makeup of the vintage braid cloth wire that you will find in vintage guitars (Les Paul's and the like) just in an easier to install and more reliable package....

-Fits USA made Gibson LP's, USA Made PRS's 245's, Epiphones and most other Gibson-Style imports with very little modification.

-Made In the USA Switchcraft Toggle Switch handwired with color coded pre-tinned 22 gauge wire. All soldered switch connections are reinforced with heatshrink to ensure years of trouble-free use.

Total of 5 Leads:

White= Hot To Tip of Input Jack

Black (2) = 1 to the back of any pot, and 1 to the ring of the Input Jack

Yellow = Neck Hot from Switch (Middle Lug of Neck Volume Pot)

Blue = Bridge Hot from Switch (Middle Lug of Bridge Volume Pot)

-Built to last, replace your scratchy and noisy switch today!