Cmatmods Analog Chorus

This is an all analog chorus pedal that has that deep lush sound that the old vintage chorus pedals had, because I use the same chips that have been long discontinued.

It has controls for rate and depth. This is the same basic circuit as the water box, but in a smaller case and is perfect for the player who doesnt need all of the features of the water box and would like it in a smaller case.

The "Analog Chorus" has a nice deep lush sound and the rate control has plenty of room to get the fast chorus that some players like, or you can back it down low for a slow rate and every where in between.

It runs on a 9v adapter or batery..

Specs:

• - BBD MN3007, MN3101 analog chips
• - True bypass
• - Alpha pots
• - 1% metal film resistors, High quality caps
• - Neutrik jacks
• - Operates on 9v batery or 9v adapter
• - Military grade circuit board
• - Military grade wire
• - Size 4.78" x 2.61" x 1.4

Cmatmods Analog Phaser

This is a 4 stage phaser with hand matched jfets for the best, and warmest sound. All analog with easy adjustments, the level control works as a fine adjustment to allow you to find unity level with your guitar rig. The depth controls the depth of the phase sound. The phase controls the speed of the phase sound. Like all CMATMODS pedals this is true bypass.

Specs:

• - Military grade wiring
• - Military grade circuit board
• - Hand matched jfets
• - Candy orange powder coating
• - Cream colored screen printing
• - Cream Davies knobs
• - Neutrik Jacks
• - EH 3pdt true bypass switch
• - Alpha pots

Cmatmods Brownie

The Brownie has controls for Gain, Level and Tone. This pedal uses the BSIAB circuit (Officially Licensed). Footprint of a Boss or Ibanez and has a bright blue LED and True Bypass.

This distortion pedal sounds like a Marshall on 11. It has great bass and attack response. The Brownie has MILES of sustain and a TON of gain.

Pedal is dead quiet with hardly any noise. Many thanks to Ed Guidry for this one!

Comes STANDARD in Copper.

Specs:

• - Durable powder coated finish
• - Davies knobs
• - Switchcraft jacks
• - Alpha pots
• - Blue LED
• - EH 3DPT true bypass switch
• - Military grade wiring
• - Hand picked and matched parts for tone and durability
• - Works on a 9V Battery or Adapter

Cmatmods Buffer

The buffer is not an effect pedal but it does have a nice affect on your tone. What happens when you have long cables or lots of effect pedals is that the capacitance and the resistance starts taking away from your tone, because cable and wire has resistance which takes the sparkle away from highs, and your bass will start becoming flabby. The buffer retains your guitar and amps original tone just like you had a really short cable and nothing else in the chain.

Even if you have non true bypass effect pedals, this will still help your tone because the buffers used in commercial effects are really poor. With true bypass effects your original signal is going straight to your amp but the resistance of the guitar cables and wire within the pedal will start breaking the signal down. The buffer brings your tone back where you want it.

The buffer is really small 1.9"x1.9"x1" it can easily be tucked out of the way on your pedal board. There are no switches to play with just a simple buffer that does the job and is small enough not to take up valuable space on your board.

If you have a large pedal board I do recommend running 2 of these one at the front of the chain and one at the end of the chain.

This runs on a 9v adapter only, its too small to use batteries. It uses Kobiconn jacks, blue LED, a military grade PCB, powder coated and screen printed and has a 2 year warranty.

Specs:

• Blue LED
• Kobiconn jacks
• Military grade circuit board
• Powder coated
• Size 1.9"x1.9"x1"

Cmatmods Butah

The Butah pedal has controls for Drive, Level and Tone. Footprint of a Boss or Ibanez and has a bright blue LED and True Bypass.

The Buttah effect is a low gain OD that sounds like an old tube amp being pushed to a slight amount of grit. It really lets the natural tone of your guitar come through and can also push your tube amp into OD when pushed.

Butah is dead quiet with hardly any noise.

Specs:

• - Durable powder coated finish
• - Davies knobs
• - Switchcraft jacks
• - Alpha pots
• - EH 3DPT true bypass switch
• - Military grade wiring
• - Hand picked and matched parts for tone and durability
• - Works on a 9V Battery or Adapter

Cmatmods Deeelay

The Deeelay has controls for Delay, Repeat and Blend. Footprint of a Boss or Ibanez and has a bright blue LED and True Bypass. This pedal now has 600ms of delay time and sounds great!

Unlike many of delays, this pedal doesn't add highs to repeats like most digital delays. What you play is what you get (delayed). Pedal is dead quiet with hardly any noise.

Comes STANDARD in Blue.

It runs on a 9v adapter or batery..

Specs:

• - Durable powder coated finish.
• - Davies knobs
• - Switchcraft jacks
• - Alpha pots
• - Blue LED
• - EH 3DPT true bypass switch
• - Military grade wiring
• - Hand picked and matched parts for tone and durability
• - Works on a 9V Battery or Adapter

Cmatmods Deluxe Signa Compressor

The Deluxe Signa Comp (Compressor) has controls for Sustain, and Level. This 4 knob version adds Tone control and Attack control to give you even more control over YOUR TONE!

Footprint of a Boss or Ibanez and has a bright blue LED and True Bypass.

I came up with this Compressor and I think it has a really nice wide range of application. It is very smooth with a lot of sustain and pop. Great low end. This can do Rock, Jazz, Country, Nashville, well you get the idea, not your standard Ross clone!. I use matched transistors, and it is true Bypass.

Pedal is quiet as far as compressors go with hardly any noise.

Comes STANDARD in Copper.

Specs:

• - Switchcraft jacks
• - Alpha pots
• - Blue LED
• - EH 3DPT true bypass switch
• - Military grade wiring
• - Hand picked and matched parts for tone and durability
• - Works on a 9V Battery or Adapter

Cmatmods Ratified

This is a new pedal that I am just now releasing. It is the Ratified, it has controls for Filter, Gain and Level it also has a 3 way toggle switch. This has a nice thick distortion with lots of sustain and drive. The Gain control works with the Filter control to give you more options with your tone. If you want it thick and dirty turn the Gain up and the Filter control to suit your tone, if you want to thin it out a little just back the Gain control down. There are lots of different variations in this box. This pedal is based around the LM308n chip.

The Ratified runs on a 9v batery or an adapter it can run up to 18v, it is true bypass and I use only the best parts. The case is powder coated and the design is screen printed.

This is a great looking pedal that sounds better!

Specs:

• - LM308n Chip
• - Heavy Duty Aluminum Enclosure
• - Durable powder coated finish
• - Davies knobs
• - Switchcraft jacks
• - Alpha pots
• - 1% Metal Film Resistors
• - Blue LED
• - EH 3DPT true bypass switch
• - Military grade wiring
• - Hand picked and matched parts for tone and durability
• - Works on a 9V Battery or Adapter

Cmatmods Signa Drive

This OD has so much tone it is unbelievable. The harmonics and note clarity just drip out of it. This is the best sounding OD that I have ever built. I would put this up against any OD at any price built by anyone. It took me along time to get this pedal where it is. I had a tone in my head and I have finally got it. This has a 3 way toggle switch that allows different clipping and gain structures.

The Signa Drive can go from a clean boost all the way to a Marshall crunch and every thing in between. If you are looking for a very versatile OD this is it. I am very proud of this pedal.

This pedal is so good, it most likely will replace both the Tubeslammer and the Tubeslammer Deluxe!

Specs:

• - RC 4558p Chip
• - Heavy Duty Aluminum Enclosure
• - Durable powder coated finish
• - Davies knobs
• - Switchcraft jacks
• - Alpha pots
• - 1% Metal Film Resistors
• - Blue LED
• - EH 3DPT true bypass switch
• - Military grade wiring
• - Double sided PCB with plated holes
• - Hand picked and matched parts for tone and durability
• - Works on a 9V Battery or Adapter

Cmatmods Super Signa Drive

This is the newest Signa Drive. I used the core of the Signa Drive and added the EQ and a little extra to fatten it up and add more sustain. The toggle switch works just like the original Signa Drive, but works side to side. It has a EQ that allows you to change the high's, mid's and bass. There is a lot of range in the EQ of this pedal so you can scoop the mids, have a mid hump or neutralize the mids. If you like the bass high and the treble low you can do that also, almost any type of EQ setting you think will sound great, it is in there. There is so much sustain in this pedal it is amazing, it just drips with harmonics and has so much clarity.

The boost works seperate from the OD so you can use it by itself or with the drive side. The boost adds fatness to the sound and it can also be used as a volume limiter. You can leave the boost on set at a low volume and turn it off for your lead work.

The pedal also use's 2 different LED's so you know which effect is on. The Boost side uses a white 3mm LED and the Drive side use's a blue 3mm LED. Like all CMATMODS pedal this is true bypass.

Specs:

• - Military grade wiring
• - Military grade circuit board
• - Cream Davies knobs
• - Alpha pots
• - Neutrik jacks
• - EH true bypass switch's
• - RC4558p chip
• - Blue LED for the drive side
• - White LED for the boost side

Cmatmods Tremoglo

The tremoglo is a tremolo effect pedal, why the name tremoglo because it glows in the dark. This is a great vintage sounding tremolo that is all analog and reminds you of the tremolo you will find in vintage amps without the annoying on/off sound.

The tremolgo is very warm sounding pedal that works well with humbuckers, p90s and single coil guitars. It has controls for depth, speed and level. There is also a 3 way toggle switch. In the up and down position it turns the flashing LED on and off. The LED will flash in time with the speed of the effect. When the switch is in the center position it allows the effect to be used as a clean boost or a preamp. When the switch is in the center position the speed and depth controls do not function.

This is a great sounding tremolo that I believe anyone that likes vintage sound tremolo will like.